Factory Directly Excavator Rock Hammer - Excavator Attachment Hydraulic Demolition Cutter Excavator Shear – Bright
Factory Directly Excavator Rock Hammer - Excavator Attachment Hydraulic Demolition Cutter Excavator Shear – Bright Detail:
Installation elements
1. Place the excavator and hydraulic shear on a relatively flat place so that the fixed end of the hydraulic shear is aligned with the excavator boom for installation of the connection.
2. Depending on the excavator model, the excavator boom connector requires the use of spacers and rubber bands between the two to be assembled together.
3. Fix the upper shaft with bolts and nuts.
4. Install the hydraulic line. When installing, be sure to make sure that the oil line and the cylinder are oriented.
5. Forbid cross installation and serious bending of the pipeline. When installing the pipeline, be sure to ensure that there are no impurities in the pipeline, to avoid damage to the cylinder caused by safety accidents.
6. New installation of hydraulic shear experiment, the cylinder first empty running 20 ~ 30 times, in order to make the cylinder air out, to avoid causing cylinder cavitation.
(Note: the cylinder empty running, the stroke to 60% of the normal stroke is appropriate, must not top to the ends)
Inspection and maintenance essentials
A. hydraulic shears during normal use, every 4 hours to play grease;.
B. every 60 hours of use, the need to check the rotary bearing screws and rotary motor screws are not loose phenomenon;.
C. often observe the state of the oil cylinder and shunt during use, whether there is damage or oil leakage;.
D. Users every 60 hours, check the oil pipe for wear and tear, rupture, etc..
E. Be sure to use Yantai Juxiang genuine parts for replacement, and we will not be responsible for any failure caused by using other non-genuine parts. The company does not bear any responsibility.
F. The whole machine should be maintained once every three months.
Product detail pictures:
Related Product Guide:
Gaining customer satisfaction is our company's aim forever. We will make great efforts to develop new and top-quality products, meet your special requirements and provide you with pre-sale, on-sale and after-sale services for Factory Directly Excavator Rock Hammer - Excavator Attachment Hydraulic Demolition Cutter Excavator Shear – Bright , The product will supply to all over the world, such as: Montreal, Slovenia, Hungary, You can always find the products you need in our company! Welcome to inquire us about our product and anything we know and we can help in auto spare parts. We are looking forward to work with you for a win-win situation.
By Elsa from Swiss - 2017.09.22 11:32
Product quality is good, quality assurance system is complete, every link can inquire and solve the problem timely!
By Ivy from kazan - 2018.06.03 10:17