Factory Supply Excavator Concrete Breaker - Excavator Attachment Hydraulic Demolition Cutter Excavator Shear – Bright
Factory Supply Excavator Concrete Breaker - Excavator Attachment Hydraulic Demolition Cutter Excavator Shear – Bright Detail:
Installation elements
1. Place the excavator and hydraulic shear on a relatively flat place so that the fixed end of the hydraulic shear is aligned with the excavator boom for installation of the connection.
2. Depending on the excavator model, the excavator boom connector requires the use of spacers and rubber bands between the two to be assembled together.
3. Fix the upper shaft with bolts and nuts.
4. Install the hydraulic line. When installing, be sure to make sure that the oil line and the cylinder are oriented.
5. Forbid cross installation and serious bending of the pipeline. When installing the pipeline, be sure to ensure that there are no impurities in the pipeline, to avoid damage to the cylinder caused by safety accidents.
6. New installation of hydraulic shear experiment, the cylinder first empty running 20 ~ 30 times, in order to make the cylinder air out, to avoid causing cylinder cavitation.
(Note: the cylinder empty running, the stroke to 60% of the normal stroke is appropriate, must not top to the ends)
Inspection and maintenance essentials
A. hydraulic shears during normal use, every 4 hours to play grease;.
B. every 60 hours of use, the need to check the rotary bearing screws and rotary motor screws are not loose phenomenon;.
C. often observe the state of the oil cylinder and shunt during use, whether there is damage or oil leakage;.
D. Users every 60 hours, check the oil pipe for wear and tear, rupture, etc..
E. Be sure to use Yantai Juxiang genuine parts for replacement, and we will not be responsible for any failure caused by using other non-genuine parts. The company does not bear any responsibility.
F. The whole machine should be maintained once every three months.
Product detail pictures:
Related Product Guide:
With dependable high-quality method, fantastic standing and ideal purchaser assistance, the series of products produced by our firm are exported to many countries and regions for Factory Supply Excavator Concrete Breaker - Excavator Attachment Hydraulic Demolition Cutter Excavator Shear – Bright , The product will supply to all over the world, such as: Mauritius, Germany, Colombia, Our company promises: reasonable prices, short production time and satisfactory after-sales service, we also welcome you to visit our factory at any time you want. Wish we have a pleasant and long terms business together!!!
By Miriam from Kazakhstan - 2017.07.28 15:46
The sales person is professional and responsible, warm and polite, we had a pleasant conversation and no language barriers on communication.
By May from Uruguay - 2018.12.28 15:18