Short Lead Time For Breaker Excavator - Excavator Attachment Hydraulic Log Wood Grapple Mechanical Grapple – Bright

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

To constantly improve the management system by virtue of the rule of "sincerely, good faith and quality are the base of enterprise development", we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for Mini Excavator Rock Breaker, Demo Breaker, Smashing Concrete With Sledgehammer, We're going to make higher efforts that can help domestic and international potential buyers, and produce the mutual advantage and win-win partnership between us. we're eagerly waiting for your sincerely cooperation.
Short Lead Time For Breaker Excavator - Excavator Attachment Hydraulic Log Wood Grapple Mechanical Grapple – Bright Detail:

Product Features

1. The company can now customize the design of wood grabbers according to different customer needs;
2. Hydraulic cylinders are equipped with balance valves to ensure smooth and safe operation;
3. The material of the rotary gear is made of 42CrMo, which is quenched and tempered + high-frequency treatment, and the life of the gear is longer;
4. The rotary motor uses the German M+S brand, and the rotary oil circuit is equipped with a protection valve to prevent the motor from being damaged by strong impact;
5. All shafts of the wood grabber are made of 45 steel quenched and tempered + high frequency, and key parts have wear-resistant shaft sleeves, which have better performance;

Classification

According to the type of hydraulic cylinder:

details

1.Mechanical type

details

2.Single cylinder type

details

3.Double cylinder type

details

4.Multiple cylinder type

Maintenance precautions

Electric control pipeline installation essentials
Install the wood grabber

1. The wood grabber is placed vertically on the ground.

2. To adjust the position of the forearm, first thread the forearm pin and fix it.

3. Adjust the position of the I-shaped frame, thread the I-shaped frame pins, and fix them.

4.Connect the oil pipe and turn on the switch

Maintenance precautions

1. During the normal use of the wood grabber, butter it every 4 hours.
2. When the wood grabber is used for 60 hours, it is necessary to check whether the slewing bearing screws and the slewing motor screws are loose.
3. Always observe the state of the oil cylinder and the diverter during use to see if there is any damage or oil leakage.
4. Every 60 hours, the user should check whether the oil pipe of the wood grabber is worn or cracked.
5. The replacement parts must use the original parts of Yantai BRIGHT factory. The company will not be responsible for the failure of the wood grabber caused by the use of other non-genuine parts. bear any responsibility.
6. Maintenance of slewing support bearings (Notes for slewing type)
After the slewing bearing installed and put into operation for 100 hours of continuous operation, it should be fully checked whether the pre-tightening torque of the mounting bolts meets the requirements.
If required, repeat the above inspection every 500 hours of continuous operation. When the slewing bearing is installed, it has been filled with an appropriate amount of grease.
After the bearing works for a period of time, it will inevitably lose a part of the grease, so every interval of the slewing bearing in normal operation is necessary.
Grease should be replenished after 50~100 hours
7. The wood grabber should be maintained every three months.

Product Specification

Model Unit BRTG03 BRTG04 BRTG06 BRTG08 BRTG10 BRTG14 BRTG20
Weight KG 320 390 740 1380 1700 1900 2100
Max Jaw Opening M/m 1300 1400 1800 2300 2500 2500 2700
Working Pressure KG/cm2 110-140 120-160 150-170 160-180 160-180 180-200 180-200
Setting Pressure Kg/cm2 170 180 190 200 210 250 250
Working Flux L/min 30-55 50-100 90-110 100-140 130-170 200-250 250-320
Oil Cylinder Capacity Ton 4.0*2 4.5*2 8.0*2 9.7*2 12*2 12*2 14*2
Suitable Excavator Ton 4-6 7-11 12-16 17-23 24-30 31-40 41-50

Product detail pictures:

Short Lead Time For Breaker Excavator - Excavator Attachment Hydraulic Log Wood Grapple Mechanical Grapple – Bright detail pictures


Related Product Guide:

We thinks what clients think, the urgency of urgency to act from the interests of a purchaser position of principle, allowing for greater top quality, decrease processing costs, price ranges are much more reasonable, won the new and aged prospects the support and affirmation for Short Lead Time For Breaker Excavator - Excavator Attachment Hydraulic Log Wood Grapple Mechanical Grapple – Bright , The product will supply to all over the world, such as: Hyderabad, Danish, Slovenia, Our faith is to be honest first, so we just supply high quality products to our customers. Really hope that we can be business partners. We believe that we can establish long time business relationship with each other. You can contact us freely for more information and pricelist of our products ! You will be Unique with our hair products !!
  • The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.
    5 Stars By Erica from Philadelphia - 2017.05.31 13:26
    High Quality, High Efficiency, Creative and Integrity, worth having long-term cooperation! Looking forward to the future cooperation!
    5 Stars By Sabrina from Pretoria - 2017.11.20 15:58
    Write your message here and send it to us