Wholesale Dealers Of Rock Hammer Excavator - Excavator Attachment Hydraulic Log Wood Grapple Mechanical Grapple – Bright
Wholesale Dealers Of Rock Hammer Excavator - Excavator Attachment Hydraulic Log Wood Grapple Mechanical Grapple – Bright Detail:
Product Features
1. The company can now customize the design of wood grabbers according to different customer needs;
2. Hydraulic cylinders are equipped with balance valves to ensure smooth and safe operation;
3. The material of the rotary gear is made of 42CrMo, which is quenched and tempered + high-frequency treatment, and the life of the gear is longer;
4. The rotary motor uses the German M+S brand, and the rotary oil circuit is equipped with a protection valve to prevent the motor from being damaged by strong impact;
5. All shafts of the wood grabber are made of 45 steel quenched and tempered + high frequency, and key parts have wear-resistant shaft sleeves, which have better performance;
Classification
According to the type of hydraulic cylinder:
1.Mechanical type
2.Single cylinder type
3.Double cylinder type
4.Multiple cylinder type
Maintenance precautions
Electric control pipeline installation essentials
Install the wood grabber
1. The wood grabber is placed vertically on the ground.
2. To adjust the position of the forearm, first thread the forearm pin and fix it.
3. Adjust the position of the I-shaped frame, thread the I-shaped frame pins, and fix them.
4.Connect the oil pipe and turn on the switch
Maintenance precautions
1. During the normal use of the wood grabber, butter it every 4 hours.
2. When the wood grabber is used for 60 hours, it is necessary to check whether the slewing bearing screws and the slewing motor screws are loose.
3. Always observe the state of the oil cylinder and the diverter during use to see if there is any damage or oil leakage.
4. Every 60 hours, the user should check whether the oil pipe of the wood grabber is worn or cracked.
5. The replacement parts must use the original parts of Yantai BRIGHT factory. The company will not be responsible for the failure of the wood grabber caused by the use of other non-genuine parts. bear any responsibility.
6. Maintenance of slewing support bearings (Notes for slewing type)
After the slewing bearing installed and put into operation for 100 hours of continuous operation, it should be fully checked whether the pre-tightening torque of the mounting bolts meets the requirements.
If required, repeat the above inspection every 500 hours of continuous operation. When the slewing bearing is installed, it has been filled with an appropriate amount of grease.
After the bearing works for a period of time, it will inevitably lose a part of the grease, so every interval of the slewing bearing in normal operation is necessary.
Grease should be replenished after 50~100 hours
7. The wood grabber should be maintained every three months.
Product Specification
Model | Unit | BRTG03 | BRTG04 | BRTG06 | BRTG08 | BRTG10 | BRTG14 | BRTG20 |
Weight | KG | 320 | 390 | 740 | 1380 | 1700 | 1900 | 2100 |
Max Jaw Opening | M/m | 1300 | 1400 | 1800 | 2300 | 2500 | 2500 | 2700 |
Working Pressure | KG/cm2 | 110-140 | 120-160 | 150-170 | 160-180 | 160-180 | 180-200 | 180-200 |
Setting Pressure | Kg/cm2 | 170 | 180 | 190 | 200 | 210 | 250 | 250 |
Working Flux | L/min | 30-55 | 50-100 | 90-110 | 100-140 | 130-170 | 200-250 | 250-320 |
Oil Cylinder Capacity | Ton | 4.0*2 | 4.5*2 | 8.0*2 | 9.7*2 | 12*2 | 12*2 | 14*2 |
Suitable Excavator | Ton | 4-6 | 7-11 | 12-16 | 17-23 | 24-30 | 31-40 | 41-50 |
Product detail pictures:
Related Product Guide:
We support our prospective buyers with ideal top quality merchandise and superior level provider. Becoming the specialist manufacturer in this sector, we have now attained abundant practical expertise in producing and managing for Wholesale Dealers Of Rock Hammer Excavator - Excavator Attachment Hydraulic Log Wood Grapple Mechanical Grapple – Bright , The product will supply to all over the world, such as: Saudi Arabia, Borussia Dortmund, Greek, Our company has already have pass the ISO standard and we are fully respect our customer 's patents and copyrights. If the customer provides their own designs, We will guarantee that they will be the only one can have that products. We hoping that with our good products can bring our customers a great fortune.
By Nora from Indonesia - 2017.12.09 14:01
High production efficiency and good product quality, fast delivery and completed after-sale protection, a right choice, a best choice.
By Doris from luzern - 2017.12.09 14:01