Wholesale Hydraulic Hammer For Mini Excavator - Excavator Attachment Hydraulic Log Wood Grapple Mechanical Grapple – Bright

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

To create far more benefit for customers is our company philosophy; customer growing is our working chase for Lightweight Demolition Hammer, Hydraulic Clamp, Demolition Concrete Breaker, With the development of society and economy, our company will keep a tenet of "Focus on trust, quality the first", moreover, we expect to create a glorious future with every customer.
Wholesale Hydraulic Hammer For Mini Excavator - Excavator Attachment Hydraulic Log Wood Grapple Mechanical Grapple – Bright Detail:

Product Features

1. The company can now customize the design of wood grabbers according to different customer needs;
2. Hydraulic cylinders are equipped with balance valves to ensure smooth and safe operation;
3. The material of the rotary gear is made of 42CrMo, which is quenched and tempered + high-frequency treatment, and the life of the gear is longer;
4. The rotary motor uses the German M+S brand, and the rotary oil circuit is equipped with a protection valve to prevent the motor from being damaged by strong impact;
5. All shafts of the wood grabber are made of 45 steel quenched and tempered + high frequency, and key parts have wear-resistant shaft sleeves, which have better performance;

Classification

According to the type of hydraulic cylinder:

details

1.Mechanical type

details

2.Single cylinder type

details

3.Double cylinder type

details

4.Multiple cylinder type

Maintenance precautions

Electric control pipeline installation essentials
Install the wood grabber

1. The wood grabber is placed vertically on the ground.

2. To adjust the position of the forearm, first thread the forearm pin and fix it.

3. Adjust the position of the I-shaped frame, thread the I-shaped frame pins, and fix them.

4.Connect the oil pipe and turn on the switch

Maintenance precautions

1. During the normal use of the wood grabber, butter it every 4 hours.
2. When the wood grabber is used for 60 hours, it is necessary to check whether the slewing bearing screws and the slewing motor screws are loose.
3. Always observe the state of the oil cylinder and the diverter during use to see if there is any damage or oil leakage.
4. Every 60 hours, the user should check whether the oil pipe of the wood grabber is worn or cracked.
5. The replacement parts must use the original parts of Yantai BRIGHT factory. The company will not be responsible for the failure of the wood grabber caused by the use of other non-genuine parts. bear any responsibility.
6. Maintenance of slewing support bearings (Notes for slewing type)
After the slewing bearing installed and put into operation for 100 hours of continuous operation, it should be fully checked whether the pre-tightening torque of the mounting bolts meets the requirements.
If required, repeat the above inspection every 500 hours of continuous operation. When the slewing bearing is installed, it has been filled with an appropriate amount of grease.
After the bearing works for a period of time, it will inevitably lose a part of the grease, so every interval of the slewing bearing in normal operation is necessary.
Grease should be replenished after 50~100 hours
7. The wood grabber should be maintained every three months.

Product Specification

Model Unit BRTG03 BRTG04 BRTG06 BRTG08 BRTG10 BRTG14 BRTG20
Weight KG 320 390 740 1380 1700 1900 2100
Max Jaw Opening M/m 1300 1400 1800 2300 2500 2500 2700
Working Pressure KG/cm2 110-140 120-160 150-170 160-180 160-180 180-200 180-200
Setting Pressure Kg/cm2 170 180 190 200 210 250 250
Working Flux L/min 30-55 50-100 90-110 100-140 130-170 200-250 250-320
Oil Cylinder Capacity Ton 4.0*2 4.5*2 8.0*2 9.7*2 12*2 12*2 14*2
Suitable Excavator Ton 4-6 7-11 12-16 17-23 24-30 31-40 41-50

Product detail pictures:

Wholesale Hydraulic Hammer For Mini Excavator - Excavator Attachment Hydraulic Log Wood Grapple Mechanical Grapple – Bright detail pictures


Related Product Guide:

The shopper satisfaction is our primary focus on. We uphold a consistent level of professionalism, quality, credibility and repair for Wholesale Hydraulic Hammer For Mini Excavator - Excavator Attachment Hydraulic Log Wood Grapple Mechanical Grapple – Bright , The product will supply to all over the world, such as: Paraguay, Vancouver, Bolivia, With a team of experienced and knowledgeable personnel, our market covers South America, the USA, the Mid East, and North Africa. Many customers have become our friends after good cooperation with us. If you have the requirement for any of our products, please contact us now. We are looking forward to hearing from you soon.
  • After the signing of the contract, we received satisfactory goods in a short term, this is a commendable manufacturer.
    5 Stars By Fay from Sheffield - 2017.12.19 11:10
    We have worked with many companies, but this time is the best,detailed explanation, timely delivery and quality qualified, nice!
    5 Stars By Maxine from Hungary - 2018.05.13 17:00
    Write your message here and send it to us